Ways to Reset an Acura Tl ABS Light 1Shift the Acura's transmission into park and turn off the engine. Turn the ignition for the "On" position with no starting the engine.2Connect the scan tool's data cable towards the Acura's diagnostic information port, located underneath the dashboard on the driver's side.
3Power on the scan tool and select "ABS" from the principle menu. Pick "codes" and after that "clear all codes." Disconnect the scan tool from the car.4Start the engine and confirm that the ABS light is no longer illuminated. How you can Reset a Volvo Verify Engine Light 1Open the fuse panel cover under the steering wheel by turning the lock knob counterclockwise and pulling down on the fuse cover ">Auto code scanner.
2Plug the electrical connector on the diagnostic tool into the pinned input slot inside the fuse panel.3Turn the Volvo's ignition essential towards the "II" position in the ignition.4Wait for the light on the diagnostic tool to quit flashing. The codes in your Volvo's electronic handle unit must be cleared at this point and also the verify engine light will reset itself ">auto diagnostic software.
Related articles:
没有评论:
发表评论