How you can Reset the PCM Memory to get a 1997 Ford Windstar 1Shift the Windstar's transmission into park. Turn off the engine. Turn the ignition key for the "ON" position, but tend not to start off the engine.
Apply the parking brake.2Plug the scan tool's data connector into the Windstar's diagnostic computer port located under the dashboard, just beneath the steering wheel. Power on the scan tool.3Follow the instructions on the scan tool's display to enter the Windstar's certain engine and powertrain details.
Choose "PCM" from the scan tool's key menu.4Choose "codes." Pick " ">Auto diagnostic tool;clear all current and stored DTCs." Wait for the scan tool to indicate the codes have already been cleared. Get started the engine and verify that the SES light is just not on ">Car Diagnostic Tools. The PCM memory is reset.
没有评论:
发表评论