The way to Reset GM Airbag Light 1Put the important in to the ignition and ensure it really is within the "Off" position and that the automobile is in park or, if it is a manual transmission GM, in 1st gear.
Engage the parking brake.2Turn the vehicle towards the "On" position, but do not start off the engine ">automotive diagnostic tool.3Plug the computerized scan tool into the diagnostic port under the driver's side dashboard correct above the pedals.4Use the arrow keys on the face with the scan tool to navigate the menu. Pick "Body Manage Module," then "Codes," then "Clear All Codes." This may turn off the airbag light on the GM's instrument panel.5Unplug the computerized scan tool and start off the engine. Notice that the SRS light has shut off.
How you can Reset Jeep Wrangler Codes 1Open the Wrangler's hood and prop it up with the help bar.2Loosen the bolt on the unfavorable battery clamp using a ratchet and socket ">Auto diagnostic tool.
Do not let the unfavorable cable clamp touch the good terminal.3Wait 30 minutes for the pc to reset itself.4Put the unfavorable battery clamp back onto the unfavorable battery terminal and tighten the bolt.5Lower the hood. Place the crucial into the ignition and commence the automobile. Confirm that all warning and service lights on the instrument cluster have shut off.
Related articles:
没有评论:
发表评论