Ways to Replace Dash Lights on Jettas 1Turn the Jetta's engine off and take away the keys from the ignition.2Lift up the upper dash trim from the instrument cluster ">Auto tools. Remove its two screws with a Phillips-head screwdriver. Remove the upper dash trim.
3Remove the 4 holding screws from the instrument cluster, employing a Phillips-head screwdriver. Pull the instrument cluster out towards you and disconnect its electrical connector.4Reach behind the instrument cluster to locate the bulbs. Eliminate any burnt-out bulbs by pulling them straight out in the instrument cluster.
5Install replacement #161 bulbs, as needed, by pushing them into the rear on the instrument cluster. Place the cluster back into the Jetta and reattach its electrical connector.6Reattach the four holding screws and the upper dash trim ">Obd2 scanner. Reattach the upper dash trim's screws.
Related articles:
没有评论:
发表评论